Myon m320 wireless EMG - Revision history

Andb at 11:09, 22 February 2018

2018-02-22T11:09:54Z

2018-02-22T11:08:38Z

2018-02-22T11:05:52Z

2018-02-22T11:05:11Z

2018-02-22T11:04:08Z

2018-02-22T10:50:49Z

2018-02-22T10:27:01Z

2018-02-22T10:26:29Z

2018-02-21T12:54:35Z

2018-02-21T12:54:08Z

@@ Line 3: / Line 3: @@
 We normally use an AD Instruments Powerlab 16/35 - 16 Channel A/D converter from Medico Lab at TEK.
-[[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]
+Link to user manual: [[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]
 The most important technical specs are <ref>''[[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]'', pp 27, table 9.1 Technical data</ref>:

@@ Line 13: / Line 13: @@
 Example: a measured voltage of 0.3V on the output BNC connector corresponds to an electrode input voltage of 0.3V / 500 = 0.0006V, or in micro volt: 600uV
+===References===
 {{reflist}}

@@ Line 7: / Line 7: @@
 The most important technical specs are <ref>''[[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]'', pp 27, table 9.1 Technical data</ref>:
 * Measurement delay from input electrode to output BNC connector is 16ms.
-* The wireless pods have an input filter with a bandwidth of 5 to 500 Hz.
+* The wireless pods have an input filter with a bandwidth of 5 to 500 Hz (3dB typical).
 * The wireless pods samples the electrode voltage with a resolution of 12 bits, sampling rate 4000 Hz.
 * Output on the BNC connectors is a voltage of +/- 2.5V.

@@ Line 7: / Line 7: @@
 The most important technical specs are <ref>''[[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]'', pp 27, table 9.1 Technical data</ref>:
 * Measurement delay from input electrode to output BNC connector is 16ms.
-* The input electrodes on the wireless pods have an input filter with a bandwidth of 5 to 500 Hz.
+* The wireless pods have an input filter with a bandwidth of 5 to 500 Hz.
 * The wireless pods samples the electrode voltage with a resolution of 12 bits, sampling rate 4000 Hz.
 * Output on the BNC connectors is a voltage of +/- 2.5V.

@@ Line 7: / Line 7: @@
 The most important technical specs are <ref>''[[Media:M320_user_manual_V1.7.pdf|M320_user_manual_V1.7.pdf]]'', pp 27, table 9.1 Technical data</ref>:
 * Measurement delay from input electrode to output BNC connector is 16ms.
 * The wireless pods samples the electrode voltage with a resolution of 12 bits, sampling rate 4000 Hz.
 * Output on the BNC connectors is a voltage of +/- 2.5V.
 * The gain is g=500 (for our specific model). The electrodes on the wireless pods have an input range of +/- 5mV.
 Example: a measured voltage of 0.3V on the output BNC connector corresponds to an electrode input voltage of 0.3V / 500 = 0.0006V, or in micro volt: 600uV
 {{reflist}}

@@ Line 8: / Line 8: @@
 * The Myon system delivers an output on the BNC connectors with a range of +/- 2.5V. (Manual page 28)
 * The gain, g, of the Myon system (specific for our model) is g=500. The electrodes on the wireless pods have an input range of +/- 5mV. (Manual page 27)
-* Example: a measured voltage of 0.3V on the output BNC connector corresponds to an electrode input voltage of 0.3V / 500 = 0.0006V, or in micro volt: 600uV

← Older revision		Revision as of 10:26, 22 February 2018
Line 6:		Line 6:

	* Measurement delay from electrode to analog output: 16ms		* Measurement delay from electrode to analog output: 16ms
		+	* The Myon system delivers an output on the BNC connectors with a range of +/- 2.5V. (Manual page 28)
		+	* The gain, g, of the Myon system (specific for our model) is g=500. The electrodes on the wireless pods have an input range of +/- 5mV. (Manual page 27)
		+	* Example: a measured voltage of 0.3V on the output BNC connector corresponds to an electrode input voltage of 0.3V / 500 = 0.0006V, or in micro volt: 600uV

← Older revision		Revision as of 12:54, 21 February 2018
Line 5:		Line 5:
	[[Media:M320_user_manual_V1.7.pdf\|M320_user_manual_V1.7.pdf]]		[[Media:M320_user_manual_V1.7.pdf\|M320_user_manual_V1.7.pdf]]

−	* Measurement delay: 16ms	+	* Measurement delay from electrode to analog output: 16ms

← Older revision		Revision as of 12:54, 21 February 2018
Line 4:		Line 4:

	[[Media:M320_user_manual_V1.7.pdf\|M320_user_manual_V1.7.pdf]]		[[Media:M320_user_manual_V1.7.pdf\|M320_user_manual_V1.7.pdf]]
		+
		+	* Measurement delay: 16ms