Bluetooth Strain Gauge
Jump to navigation
Jump to search
Notes for setting up the Bluetooth strain gauge (RN42-0452) with e.g. MATLAB:
In terminal (you may have to manually switch on your bluetooth connection)
- Scan for devices:
hcitool scan
Look for the MAC-ADDRESS and copy it into the following <MAC> This will bind the device to the name /dev/rfcomm1:
(sudo) rfcomm bind /dev/rfcomm1 <MAC>
Afterwards, check if it has been bound:
rfcomm -a
To remove the binding:
rfcomm release /dev/rfcomm1
