Bluetooth Strain Gauge

From Training Technology Lab Wiki
Revision as of 13:26, 30 October 2017 by Cljak12 (talk | contribs)
Jump to navigation Jump to search

Notes for setting up the Bluetooth strain gauge (RN42-0452) with e.g. MATLAB:

In terminal (you may have to manually switch on your bluetooth connection)

  • Scan for devices:
 hcitool scan

Look for the MAC-ADDRESS and copy it into the following <MAC> 

(sudo) rfcomm bind /dev/rfcomm1 <MAC>

This will bind the device to the name /dev/rfcomm1.

Retrieved from "http://ttl.tek.sdu.dk/wiki/index.php?title=Bluetooth_Strain_Gauge&oldid=56"